18-04-2024, 04:20 PM
(This post was last modified: 18-04-2024, 04:21 PM by Murphyv310.)
Hi.
A common fault on Weller magnastat soldering irons, very much the standard iron for the TV trade. The 10n is a bit on the small side to help with contact burning so we always fitted a 0.1uf 400v cap, improves magnastat reliability and arcing, never had any further issues after this mod.
NOTE only for 24v irons.
A common fault on Weller magnastat soldering irons, very much the standard iron for the TV trade. The 10n is a bit on the small side to help with contact burning so we always fitted a 0.1uf 400v cap, improves magnastat reliability and arcing, never had any further issues after this mod.
NOTE only for 24v irons.
