(29-03-2024, 07:28 AM)OldTVEnthusiast Wrote: Frank, does the gui switch modes ok and get as far as asking if you want to make the change permanent? I remember that at one point I had to start afresh with a new image as the gui options disappeared after an update.
The GUI works normally.
But the vintage standards don't appear in screen configuration. Only the normal ones can be seen.
kmsprint -m will list the vintage standards.
To get it to boot to 405 lines in console mode I added video=Composite-1:544x380i to cmdline.txt
As far as I understand that should make it boot to 405 in GUI mode as well.
If I boot to GUI I get 2 to 3 seconds of 405 at startup (before the GUI appears) then it returns to 625 and also at shut down at the very end there is about a second of 405.
Frank
