Hose for Hoover Aquamaster - wanted

[ppppenguin]

The hose for my Hoover Aquamaster is now getting beyond reasonable repiar. The vac itself is still great. Does anyone have a spare hose or know where to get one. Plenty visible online but always unavailable. Like this:

https://www.amazon.co.uk/HOOVER-AQUAMAST...B002C2V184

[Refugee]

Try your local flea market.
There is usually someone with a table of vac spares who might be able to help you.

[boater sam]

If the end pieces are OK, you can fit them to a new length of hose.

[westcliff]

There's a vacuum cleaner spares and repair shop near me Jeffrey. I can ask tomrrow if they have the part.

Gus.

[Terry]

There used to be a stall for spares in Romford Market - perhaps Unreal Dave can help with that. Also, as many of these stalls move to other markets on different days of the week, if they can help, they might also serve a market closer to you.

[ppppenguin]

Unfortunately the ends are not OK. I've done an interesting repair with solvent weld and a capacitor clamp. Also there's no obvious way of removing and attaching the hose on the ends.

[Murphyv310]

You can buy generic fitments and hoses, I'm certain one of the industrial vacuums use the same fitment as the aquamaster. We used to use Brushrite but their web site has changed in the last 3 years.
There are other suppliers of hoses etc too and if I remember I'll post them up.

[Murphyv310]

Try G&S supplies too.
https://www.gspen.co.uk/vacuum-cleaner-spares.html

[Murphyv310]

The lads in G&S are very helpful and can often give a solution over the phone. Brushrite were the same but it looks so different now, perhaps an email or call may work
http://www.brushrite.co.uk