02-04-2015, 08:46 PM
Having not much luck finding a circuit diag / service manual for this little sweetheart which is not putting any signal out. Any documentary help gratefully accepted. Thanks.
|
Thandar TG502 sweep gen
|
|
02-04-2015, 09:34 PM
Email them and ask them nicely - they will almost certainly reply with a PDF. That's what they did for my TG1010 - they couldn't have been more helpful. And I bet they won't object to it being made available here.
Cheers, Mark
03-04-2015, 08:03 AM
the circuit is free here http://www.ko4bb.com/manuals/index.php?d...nt/Thurlby
Rob T
if its made by hand it can be repaired by hand
03-04-2015, 08:44 AM
Dammit - I looked there and managed to miss it!
 At first glance, it's a complicated beast. But that's mostly because there is no block diagram. When you break it down, it's pretty "textbook" in design. Years ago I was given a broken Wavetek 162 which is quite similar, and I spent a lot of time figuring it all out - so if you need any pointers, do shout 
|
| Users browsing this thread: |
| 1 Guest(s) |