15-12-2017, 02:57 PM
Hi.
Well mine is just about complete. I've fitted a new volume and on off switch, added a 2.2nf cap directly to the IF HT supply pin for improved de coupling, also de coupled the heater supply on the EF184 at the pin, also a little tone correction on the audio output transformer primary. The instability on long wave is cleared and results are really good. All I have to is cut the control spindles and make a simple dial. Only took about four years. All the circuits and original stuff was on VRAT but its strangely all been delete.
Well mine is just about complete. I've fitted a new volume and on off switch, added a 2.2nf cap directly to the IF HT supply pin for improved de coupling, also de coupled the heater supply on the EF184 at the pin, also a little tone correction on the audio output transformer primary. The instability on long wave is cleared and results are really good. All I have to is cut the control spindles and make a simple dial. Only took about four years. All the circuits and original stuff was on VRAT but its strangely all been delete.
