16-10-2015, 11:33 AM
That's a lovely job you did with the speaker cloth on 'Storkie' Gary. I will follow your advice and glue it in stages. Sadly (stupidly) I only bought one piece of cloth and it has a herringbone pattern too! I'll have to be extra careful and keep my fingers crossed. I have some UHU so that's what I will go with.
Interestingly, in your article (nicely written by the way) your cone speaker is held in place in the cabinet with wood toggles and that makes a lot of sense. There was nothing like this holding the speaker in the Marconiphone, it was supported just by the steel pin which connects to the cone from the magnet leaf. I am now wondering if these toggles would have originally been there and have been lost in decades past. In which case I will want to replace them.
Nick
Interestingly, in your article (nicely written by the way) your cone speaker is held in place in the cabinet with wood toggles and that makes a lot of sense. There was nothing like this holding the speaker in the Marconiphone, it was supported just by the steel pin which connects to the cone from the magnet leaf. I am now wondering if these toggles would have originally been there and have been lost in decades past. In which case I will want to replace them.
Nick







