22-06-2012, 12:21 PM
Thanks for an interesting post Colin.
Your thread chaser handles and chest look superb! Thread chasing is an acquired skill which some take to better than others. To start the thread calls for a touch like a butterflies wing till you get a rhythm going and remember to lift off at the end or you strip the thread. Some timbers - boxwood for example, take a thread easier than others.
As to chisel and gouge handles, you're right of course - like you I guess - I buy all my chisels unhandled and turn the handles from ash - it only takes a few minutes, and apart from the saving in cost, I think it would be beneath my dignity to pay for handles I can easily make myself. However, many professional demonstrators, production turners and a lot of amateurs these days seem to use quick change handles such as those that Simon designs and sells, into which single or dual ended tools fit - perhaps a bowl gouge at one end and a scraper or skew at the other. So, they have many chisels, but just a few handles. (Ashley Isles supplies a lot of the unhandled tools).
All of Simon's stuff is expensive, but good quality. Many hobbyists are older, debt-free and have high disposable incomes. As with every other product, it's a paradox that the cachet of the brand often jacks up the price to what the market can stand, and the price has little to do with the cost of manufacture. Higher prices often add to the appeal of the product - it works for everything - cars, clothing, whatever. 40% of Audi Quatro parts (running gear, brakes, steering etc) share the same parts bins as a Skoda Octavia, but it doesn't stop Audi Quatro buyers paying over the odds, largely because of the appeal of the brand cachet. It's why people will cheerfully pay £70 for a wooly 'bobble hat' like the one below, when similar hats of comparable design and quality can be had for a tenth of that price. Why? Because of the brand cachet - 'Paul Smith':
http://www.vanmildert.com/mens-1/accessories-93/hats-caps-166/paul-smith-accessories-mens-275290.htm?utm_source=froogle&utm_medium=ppc&utm_campaign=Paul+Smith+Accessories&gclid=CLyOzsDl4bACFU4lfAodBEpV0g
It's no use trying to rationalise this - logic goes out of the window when emotions come into play. How do we explain why people in their thousands up and down the land will camp out in the rain overnight to see someone run part carrying an Olympic torch when I wouldn't bother to look out of the widow if someone ran past my house with it? I just couldn't be less interested.
Back to the plot - A useful woodturning website here that might be of interest to a few: http://www.turningtools.co.uk/shop1/shopenter.html
(Click on the 'Woodturners Workshop' link at the bottom left of the homepage).
Waffled and dribbled Yorkie.
Your thread chaser handles and chest look superb! Thread chasing is an acquired skill which some take to better than others. To start the thread calls for a touch like a butterflies wing till you get a rhythm going and remember to lift off at the end or you strip the thread. Some timbers - boxwood for example, take a thread easier than others.
As to chisel and gouge handles, you're right of course - like you I guess - I buy all my chisels unhandled and turn the handles from ash - it only takes a few minutes, and apart from the saving in cost, I think it would be beneath my dignity to pay for handles I can easily make myself. However, many professional demonstrators, production turners and a lot of amateurs these days seem to use quick change handles such as those that Simon designs and sells, into which single or dual ended tools fit - perhaps a bowl gouge at one end and a scraper or skew at the other. So, they have many chisels, but just a few handles. (Ashley Isles supplies a lot of the unhandled tools).
All of Simon's stuff is expensive, but good quality. Many hobbyists are older, debt-free and have high disposable incomes. As with every other product, it's a paradox that the cachet of the brand often jacks up the price to what the market can stand, and the price has little to do with the cost of manufacture. Higher prices often add to the appeal of the product - it works for everything - cars, clothing, whatever. 40% of Audi Quatro parts (running gear, brakes, steering etc) share the same parts bins as a Skoda Octavia, but it doesn't stop Audi Quatro buyers paying over the odds, largely because of the appeal of the brand cachet. It's why people will cheerfully pay £70 for a wooly 'bobble hat' like the one below, when similar hats of comparable design and quality can be had for a tenth of that price. Why? Because of the brand cachet - 'Paul Smith':
http://www.vanmildert.com/mens-1/accessories-93/hats-caps-166/paul-smith-accessories-mens-275290.htm?utm_source=froogle&utm_medium=ppc&utm_campaign=Paul+Smith+Accessories&gclid=CLyOzsDl4bACFU4lfAodBEpV0g
It's no use trying to rationalise this - logic goes out of the window when emotions come into play. How do we explain why people in their thousands up and down the land will camp out in the rain overnight to see someone run part carrying an Olympic torch when I wouldn't bother to look out of the widow if someone ran past my house with it? I just couldn't be less interested.
Back to the plot - A useful woodturning website here that might be of interest to a few: http://www.turningtools.co.uk/shop1/shopenter.html
(Click on the 'Woodturners Workshop' link at the bottom left of the homepage).
Waffled and dribbled Yorkie.
Regards, David.
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'







