28-10-2011, 05:16 PM
Hi Col, well there was no serious joinery in the PYE cab - basic lap joints cut with the router. I enjoy both the cabinetry and the electronics when restoring a radio so double the fun for me!
Right now the Grundig cab is completely stripped down, all finish removed and I'm repairing various bits of missing or lifted veneer. I need to come up with a nice way to restore the top and bottom edges which are badly damaged. Hopefully I'll get that done this weekend and I can start to think about the final finish. I'm thinking I'll use the same shellac process I used on the PYE.
Cheers, John
Right now the Grundig cab is completely stripped down, all finish removed and I'm repairing various bits of missing or lifted veneer. I need to come up with a nice way to restore the top and bottom edges which are badly damaged. Hopefully I'll get that done this weekend and I can start to think about the final finish. I'm thinking I'll use the same shellac process I used on the PYE.
Cheers, John
Time flies like an arrow, fruitflies like a banana!
